Special Tools

For equivalent regional tools, refer to Special Tools.

1. Install the EN-652 holder  (1), lock the flywheel (2) via the starter ring gear.

Caution: Refer to Fastener Caution in the Preface section.




2. Install the crankshaft balancer (1) and NEW bolt (2) with screw locking compound and tighten in 3 passes using the EN-45059 sensor kit :

2.1.	First pass to  95 N·m (70 lb ft)

2.2.	Second pass to  45 degrees

2.3.	Third pass to  15 degrees