For 1990-2009 cars only
- Install the 4 multiport fuel injector seals (6).
- Install the multiport fuel injection fuel rail (4) and the fuel injectors (5) to the intake manifold (7).
- Install the 2 multiport fuel injection fuel rail bolts and tighten to 8 N·m (71 lb in).
- Install the evaporative emission canister purge solenoid valve bracket (1) to the intake manifold (7).
- Install the 2 evaporative emission canister purge solenoid valve bracket bolts (2) and tighten to 8 N·m (71 lb in).
- Install the NEW intake manifold seal (3) to the intake manifold (2).
- Install the NEW throttle body seal (1).
- Install the intake manifold mount (2) to the intake manifold (1).
- Install the manifold absolute pressure sensor (1) to the intake manifold (2).
- Install the intake manifold absolute pressure sensor bolt and tighten to 6 N·m (54 lb in).
Caution: Refer to Fastener Caution in the Preface section.
