For 1990-2009 cars only
Removal Procedure
- Remove the air mass flow sensor wiring harness plug (1).
- Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Front Duct Replacement.
- Remove the front air cleaner housing drain hose (1) from air cleaner housing (3).
- Remove the rear air cleaner housing drain hose (2) from air cleaner housing (3).
- Remove the air cleaner assembly (1).
- Unclip the air cleaner housing (1) from the front bracket (3) and rear bracket (2).
- Loosen the air mass flow sensor clamp (2).
- Remove the air mass flow sensor (1) from the air cleaner housing (3).
- Remove the 2 intake air duct resonator insulators (4).
- Remove the rear intake air duct sealing (5).
Caution: Any time service is being performed which requires removal of the air cleaner assembly, always cover the throttle body opening. This will prevent any foreign material from entering the engine.
Installation Procedure
- Install the rear intake air duct sealing (5).
- Install the 2 intake air duct resonator insulators (4).
- Install the air mass flow sensor (1) at the air cleaner housing (3).
- Fasten the air mass flow sensor clamp (2) and tighten with 3.5 N·m(31 lb in).
- Install the air cleaner assembly (1).
- Install the air cleaner housing (1) at the front bracket (3) and rear bracket (2).
- Install the rear air cleaner housing drain hose (2) at air cleaner housing (3).
- Install the front air cleaner housing drain hose (1) at air cleaner housing (3).
- Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Front Duct Replacement.
- Install the air mass flow sensor wiring harness plug (1).
