GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Daewoo 🢒 2008 🢒 G2X 🢒 Engine 🢒 Engine Mechanical - 2.0L 🢒 Engine Block Assemble

    Object Number: 412447 Size: SH
  1. Install the drain plug in the water pump.
  2. Apply GM P/N 12346004 (Canadian P/N 10953480), or equivalent, to the plug before installation.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the coolant jacket plugs.

    4. Tighten
    Tighten the coolant jacket plug to 35 N·m (26 lb ft).

  4. Install the rear oil passage plugs.
  5. Apply GM P/N 12346004 (Canadian P/N 10953480), or equivalent, to the plugs before installation.

    6. Tighten
    Tighten the oil passage plug to 60 N·m (44 lb ft).

  6. Install the other oil passage plugs.
  7. Apply GM P/N 12346004 (Canadian P/N 10953480), or equivalent, to the plug before installation.

    8. Tighten
    Tighten the oil passage plugs to 35 N·m (26 lb ft).


    Object Number: 1825052 Size: SH
  8. Lubricate the crankshaft position (CKP) sensor O-ring with clean engine oil.
  9. Install the CKP sensor and bolt.

    10. Tighten
    Tighten the CKP sensor bolt to 10 N·m (89 lb in).


    Object Number: 1825051 Size: SH
  10. Install the oil pressure switch.

    11. Tighten
    Tighten the oil pressure switch to 26 N·m (19 lb ft).


    Object Number: 1769811 Size: SH
  11. Install the knock sensors and bolts.

    12. Tighten
    Tighten the knock sensor bolts to 25 N·m (18 lb ft).


    Object Number: 1594334 Size: SH
  12. Install the piston oil nozzle assemblies.
  13. Install the piston oil nozzle assembly bolts.

    14. Tighten
    Tighten the piston oil nozzle assembly bolts to 15 N·m (11 lb ft).