GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Venture Ext. 🢒 Brakes 🢒 Antilock Brake System 🢒 Front Wheel Speed Sensor Replacement

Removal Procedure

Important: The front wheel speed sensors and rings are integral with the hub and bearing assemblies.

If a speed sensor or a ring needs replacement, replace the entire hub and bearing assembly. Do not service the harness pigtail individually because the harness pigtail is part of the sensor.

Remove the hub and bearing assembly. Refer to Front Wheel Bearing and Hub Replacement .

Installation Procedure
  1. Install the hub and bearing assembly to the vehicle. Refer to Front Wheel Bearing and Hub Replacement .
  2. Lower the vehicle.
  3. Turn the ignition switch to the RUN position with the engine OFF.
  4. Perform diagnostic system check. Refer to Diagnostic System Check - Vehicle .