GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the upper seat trim. Refer to Sit-N-Lift Upper Trim Replacement.

  2. Object Number: 1368553  Size: SH
  3. Remove the fasteners from the module bracket.

  4. Object Number: 1368564  Size: SH
  5. Disconnect the electrical connectors from the module.

  6. Object Number: 1368566  Size: SH
  7. Remove the module from the seat base.

Installation Procedure


    Object Number: 1368564  Size: SH
  1. Align the module with the seat base and connect the electrical connectors to the module.
  2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1368553  Size: SH
  3. Install the module bracket and secure with fasteners.
  4. Tighten
    Tighten the fasteners to 2 N·m (18 lb in).

  5. Test the module for proper operation.
  6. Install the upper seat trim. Refer to Sit-N-Lift Upper Trim Replacement.
  7. Refer to Control Module References for programming and setup information.