GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Venture Ext. 🢒 Body and Accessories 🢒 Doors 🢒 Door Trim Plate Replacement

Removal Procedure

    Object Number: 319753 Size: SH
  1. Use the following procedure in order to remove the switch mounting plate:
    2. 1.1. Use a flat-bladed tool at the rear of the switch mounting plate in order to release the clip.
    1.2. Lift up in order to unsnap the mounting plate from the front door trim panel.
  2. Disconnect the electrical connectors.

    3. Object Number: 319756 Size: SH
  3. Unsnap the switch from the mounting plate.

Installation Procedure

    Object Number: 319756 Size: SH
  1. Install the switch to the mounting plate.
  2. Connect the electrical connectors.

    3. Object Number: 319753 Size: SH
  3. Install the switch mounting plate to the front door trim panel.

    4. Insert the front edge into the trim panel and snap down the rear of the switch plate to the front door trim panel.