GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Venture Ext. 🢒 Body and Accessories 🢒 Body Front End 🢒 Hood Secondary Latch Replacement

Removal Procedure
  1. Open and support the hood.

    2. Object Number: 315260 Size: SH
  2. Remove the secondary hood latch-to-hood bolts.

    3. Object Number: 314165 Size: SH
  3. Remove the secondary hood latch linkage from the latch.
  4. Remove the secondary hood latch from the hood.

Installation Procedure
  1. Install the secondary hood latch.

    2. Object Number: 314165 Size: SH
  2. Install the secondary hood latch linkage to the hood latch.

    3. Object Number: 315260 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the secondary hood latch bolts.

    4. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  4. Close the hood.