For 1990-2009 cars only
Removal procedure
- Turn the ignition switch to the ACCY position.
- Set the wiper switch to the Delay position.
- Turn the ignition switch off when the wipers are in the innerwipe position.
- Using a small flat-bladed tool, remove the lower washer nozzle from the wiper arm.
- Using a small flat-bladed tool, remove the upper washer nozzle from the wiper arm.
- Disconnect the upper washer nozzle from the upper washer nozzle hose.
- Remove the upper washer nozzle hose from the wiper arm.
- Disconnect the washer nozzle hose Y-fitting from the washer hose.
- Remove the washer nozzle hose from the wiper arm.
Installation Procedure
- Position the washer nozzle hose to the wiper arm.
- Connect the washer nozzle hose Y-fitting to the washer hose.
- Install the upper washer nozzle hose to the wiper arm.
- Connect the upper washer nozzle to the upper washer nozzle hose.
- Position the upper washer nozzle to the wiper arm, pressing in until fully seated.
- Position the lower washer nozzle to the wiper arm, pressing in until fully seated.
- Inspect the washers for proper operation.
