GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2004 🢒 Venture 🢒 Accessories 🢒 Entertainment 🢒 Radio Antenna Replacement

Removal Procedure

    Object Number: 802312 Size: SH

    Notice: Use tape on the tool surface so that you do not damage the paint on the antenna mast.

  1. Unscrew the antenna mast.
  2. Remove the mast from the antenna base.
  3. Unscrew the locking nut from the base in order to release the base from the fender.
  4. Remove the base from the fender.

    5. Object Number: 802334 Size: SH
  5. Disconnect the antenna extension lead.

Installation Procedure

    Object Number: 802334 Size: SH
  1. Connect the antenna extension lead to the antenna base.

    2. Object Number: 802312 Size: SH
  2. Run the antenna lead through the fender hole
  3. Align the lead with the antenna base.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Tighten the locking nut and fasten the antenna base to the fender.

    5. Tighten
    Tighten the nut to 5 N·m (44 lb in).