GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2004 🢒 Venture 🢒 Suspension 🢒 Front Suspension 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Move/turn the tires in order to access the stabilizer shaft insulator brackets.

    3. Object Number: 357447 Size: SH
  3. Remove the left and right side stabilizer shaft insulator bracket bolts.
  4. Remove the left and right side stabilizer shaft insulator brackets.

    5. Object Number: 174594 Size: SH
  5. Remove the left and right side stabilizer shaft insulators (1) from the stabilizer shaft (2).

Installation Procedure

    Object Number: 174594 Size: SH
  1. Install the left and right side stabilizer shaft insulators (1) to the stabilizer shaft (2).

    2. Object Number: 357447 Size: SH
  2. Install the left and right side stabilizer shaft insulator brackets.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the left and right side stabilizer shaft insulator bracket bolts.

    4. Tighten
    Tighten the stabilizer shaft insulator bracket bolts to 48 N·m (35 lb ft).

  4. Lower the vehicle.