This table identifies which serial data link that a particular module uses for in-vehicle data transmission. Some modules may use more than one data link to communicate. Some modules may have multiple communication circuits passing through them without actively communicating on that data link. This table is used to assist in correcting a communication malfunction. For the description and operation of these serial data communication circuits refer to Data Link Communications Description and Operation.
Control Module | Data Link Type | Diagnostic Procedure | ||||
|---|---|---|---|---|---|---|
Schematic Reference: Data Communication Schematics | ||||||
Body Control Module (BCM) | Class 2 | |||||
Digital Radio Receiver (DRR) | Class 2 | |||||
Driver Position (memory seat) Module | Class 2 | |||||
Electronic Brake Control Module (EBCM) | Class 2 | |||||
Engine / Powertrain Control Module (ECM/PCM) |
| |||||
HVAC Control Module | Class 2 | |||||
Inflatable Restraint Sensing and Diagnostic Module (SDM) | Class 2 | |||||
Instrument Panel Cluster (IPC) | Class 2 | |||||
Power Sliding Door Module-Left | Class 2 | |||||
Power Sliding Door Module-Right | Class 2 | |||||
Radio | Class 2 | |||||
Rear Seat Entertainment (RSE) Module | Class 2 | |||||
Remote Control Door Lock Receiver (RCDLR) | Class 2 | |||||
Transmission Control Module (TCM) | High Speed GMLAN | |||||
Vehicle Communication Interface Module (OnStar VCIM) | Class 2 | |||||
