Driver Knee Bolster Replacement. Chevrolet Traverse 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Traverse 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Driver Knee Bolster Replacement

Driver Knee Bolster Replacement Traverse

Callout	Component Name
Preliminary Procedure Remove the hood latch release handle assembly. Refer to Hood Primary Latch Release Cable Handle Replacement.
1	Driver Knee Bolster Screw (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2.5 N·m (22 lb in)
2	Driver Knee Bolster Assembly Procedures Disconnect the electrical connections. When replacing the knee bolster, transfer all necessary components.

Callout

Component Name

Remove the hood latch release handle assembly. Refer to Hood Primary Latch Release Cable Handle Replacement.

Driver Knee Bolster Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

Driver Knee Bolster Assembly

Callout	Component Name
Preliminary Procedure Remove the hood latch release handle assembly. Refer to Hood Primary Latch Release Cable Handle Replacement.
1	Driver Knee Bolster Screw (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2.5 N·m (22 lb in)
2	Drivers Knee Bolster Assembly Procedure Disconnect the electrical connections. When replacing the drivers knee bolster, transfer all necessary components.
3	Retainer Clip (Qty: 5)

Callout	Component Name
Preliminary Procedure Remove the hood latch release handle assembly. Refer to Hood Primary Latch Release Cable Handle Replacement.
1	Driver Knee Bolster Screw (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2.5 N·m (22 lb in)
2	Driver Knee Bolster Assembly Procedures Disconnect the electrical connections. When replacing the knee bolster, transfer all necessary components.
3	Retainer Clip (Qty: 5)

Callout	Component Name
Preliminary Procedure Remove the hood latch release handle assembly. Refer to Hood Primary Latch Release Cable Handle Replacement.
1	Driver Knee Bolster Screw (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2.5 N·m(22 in lb)
2	Driver Knee Bolster Assembly Procedure Disconnect the electrical connections. When replacing the steering column opening filler, transfer all necessary components.
3	Retainer Clip (Qty: 5)