| Table 1: | Supplemental Inflatable Restraint Scan Tool Data Parameters |
| Table 2: | Supplemental Inflatable Restraint Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Ignition ON | |||
Battery Voltage Signal | -- | Varies | This displays volts. This is the voltage input supplied to the SDM. |
Driver Frontal Stage 1-2 Loop | -- | Not Present | The scan tool displays Present and Not Present. This is the status of the driver frontal stage loop. |
Driver Pretensioner Loop | -- | Not Present | The scan tool displays Present and Not Present. This is the status of the driver pretensioner loop. |
Driver Roof Rail | -- | Not Present | The scan tool displays Present and Not Present. This is the status of the driver roof rail. |
Driver Seat Belt Switch | -- | Unbuckled | The scan tool displays Buckled or Unbuckled. This is the state of the driver seat belt. |
Driver Seat Belt Switch | -- | Not Present | The scan tool displays Not Present or Present. This is the state of the driver seat belt. |
Driver Seat Position Sensor | -- | Varies | The scan tool displays Rearward or Forward. This is the positional state of the drive seat. |
Driver Seat Position Sensor | -- | Not Present | The scan tool displays Present and Not Present. This is the positional state of the drive seat. |
Driver Side Impact Sensor | -- | Not Present | The scan tool displays Not Present and Present. This is the status of the driver side impact sensor. |
Front End Sensor 1-2 | -- | Not Present | The scan tool displays Present and Not Present. This is the status of the front end sensor. |
Passenger Presence System | -- | Not Present | The scan tool displays Present or Not Present. This is the status of the passenger presence system. |
Passenger Pretensioner Loop | -- | Not Present | The scan tool displays Present and Not Present. This is the status of the passenger pretensioner loop. |
Passenger Seat Belt Switch | -- | Unbuckled | The scan tool displays Buckled or Unbuckled. This is the state of the passenger seat belt. |
Passenger Seat Belt Switch | -- | Not Present | The scan tool displays Present or Not Present. This is the state of the passenger seat belt. |
PPS Status | -- | Varies | The scan tool displays Suppress, Empty Seat, Child Seat, Enable. This is the status of the passenger presence system. |
Psgr. Frontal Stage 1-2 Loop | -- | Not Present | The scan tool displays Present and Not Present. This is the status of the passenger frontal stage loop. |
Psgr. Roof Rail | -- | Not Present | The scan tool displays Present and Not Present. This is the status of the passenger roof rail. |
Psgr. Seat Position Sensor | -- | Not Present | The scan tool displays Present or Not Present. This is the status of the positional sensor of the passenger seat. |
Psgr. Seat Position Sensor | -- | Varies | The scan tool displays Rearward or Forward. This is the positional state of the passenger seat. |
Psgr. Side Impact Sensor | -- | Not Present | The scan tool displays Present and Not Present. This is the status of the passenger side impact sensor. |
Rollover Sensor | -- | Not Present | The scan tool displays Present and Not Present. This is the status of the rollover sensor. |
SIR Warning Indicator | -- | Off | The scan tool displays On or Off. This is the status of the SIR warning indicator. |
Output Control | Description |
|---|---|
Setup New SDM | This output control is used to set up a new SDM. |
Setup SDM Part Number in BCM | This output control is used to set up a new SDM part number in the BCM. |
