For 1990-2009 cars only
Removal Procedure
- Remove the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement.
- Disconnect the ignition coil connectors (1) from the ignition coils.
- Remove the retaining bolts (2) from the ignition coils.
- Remove the ignition coils (1) from the engine.
Installation Procedure
- Install the ignition coil (1).
- Install the ignition coil retaining bolts (2) and tighten to 10 N·m (89 lb in).
- Replace the ignition coil connectors (1).
- Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement.
Note: Make sure that the ignition coil seals are properly seated to the valve cover.
Caution: Refer to Fastener Caution in the Preface section.
