Notice: Do not loosen or remove the 6 bolts securing the clutch support to the pump cover assembly. These bolts have been installed and torqued only after specific clutch support rotational requirements have been met. If the clutch support is not installed properly, damage to the transmission will occur.

1

1-2-3-4 and 3-5 Reverse Clutch Housing Thrust Washer

2

Bolt M6 x 40 (Qty: 13)

3

Fluid Pump Cover Assembly

4

Fluid Pump Vane Ring

5

Fluid Pump Rotor

6

Fluid Pump Vanes (Qty: 13)

7

Fluid Pump Rotor Guide

8

Fluid Pump Vane Ring

9

Fluid Pump Slide Outer Spring

10

Fluid Pump Slide

11

Fluid Pump Slide (O-Ring) Seal

12

Fluid Pump Slide Fluid Seal Ring

13

Fluid Pump Slide Seal

14

Fluid Pump Slide Seal Support

15

Fluid Pump Slide Pivot Pin