For 1990-2009 cars only
- Attach a sling to the transmission.
- Attach a hoist to the sling.
- Put moderate lift tension on the hoist.
- Disconnect and remove the transmission from the repair stand.
- Place the transmission on the work table with the oil pan facing down.
- Install the power take-off (PTO) cover gaskets (1)
- Install 2 PTO covers (2).
- Install 12 PTO cover bolts (3).
Caution: The 1000 Series™ transmission dry weight is approximately 150 kg (330 lb). To help avoid personal injury and/or property damage: Use caution when installing, removing, or moving the transmission. Get help when lifting the transmission. Assistance from a hoist or another person may be required. Ensure that lifting equipment can properly support the transmission.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the bolts to 43 N·m (31 lb ft).
