GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 TrailBlazer - 4WD 🢒 Engine 🢒 Engine Mechanical - 4.2L 🢒 Drive Belt Replacement

Removal Procedure
  1. Install 3/8 inch breaker bar on the drivebelt tensioner arm and turn the breaker bar clockwise enough to relieve the tension on the drivebelt.

    2. Object Number: 753677 Size: SH
  2. Remove the drivebelt.
  3. Release the tension on the tensioner arm.

Installation Procedure

    Object Number: 753677 Size: SH
  1. Route the drivebelt over all the pulleys except the drivebelt tensioner pulley.
  2. Install the 3/8 inch breaker bar on the drivebelt tensioner arm and turn the breaker bar clockwise.
  3. Install the drivebelt over the drivebelt tensioner pulley.
  4. Slowly release the tension to the drivebelt tensioner arm.
  5. Inspect for proper installation of the drivebelt on the pulleys.