Instrument Panel Insulator Panel Replacement GMC/Chevrolet

1. Remove the floor console. Refer to Console Replacement .
2. Remove the 4 screws that retain the closeout panel to the instrument panel (I/P) substrate.
3. Remove the closeout panel from the vehicle.

1. Install the closeout panel to the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the 4 screws that retain the closeout panel to the I/P.

Tighten
Tighten the screws to 1.9 N·m (17 lb in).

3. Install the floor console. Refer to Console Replacement .