GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 TrailBlazer - 2WD 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 4L60-E/4L65-E/4L70-E 🢒 Front Floor Console Compartment Replacement

Removal Procedure

    Object Number: 741607 Size: SH
  1. Open the storage bin cover.
  2. Remove the rubber mats covering the retaining screws.
  3. Remove the 6 screws that retain the storage bin to the console.
  4. Remove the storage bin from the console.

Installation Procedure

    Object Number: 741607 Size: SH
  1. Install the storage bin to the console.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the 6 screws that retain the storage bin to the console.

    3. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  3. Install the rubber mats covering the retaining screws.
  4. Close the storage bin cover.