Tools Required

J 41712 Oil Pressure Switch Socket

1. Remove the intake manifold. Refer to Intake Manifold Replacement .
2. Disconnect the oil pressure sensor electrical connector (1).



3. Using J 41712 or equivalent, remove the oil pressure sensor.

Notice: Refer to Fastener Notice in the Preface section.




1. Apply sealant to the threads of the oil pressure sensor. Refer to Adhesives, Fluids, Lubricants, and Sealers for the correct part number.
2. Using J 41712 or equivalent, install the oil pressure sensor.

Tighten
Tighten the sensor to 20 N·m (15 lb ft).




3. Connect the oil pressure sensor electrical connector (1).
4. Install the intake manifold. Refer to Intake Manifold Replacement .