For 1990-2009 cars only
Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Install the rear axle support.
- Remove the shock absorber lower mounting bolts.
- Lower the rear axle.
- Remove the rear coil springs.
Notice: Do not lower the rear axle so that the upper control arms contact the frame. Damage to the upper control arms will result.
Notice: Use care when handling the coil springs in order to avoid chipping or scratching the coating. Damage to the coating will result in premature failure of the coil springs.
Installation Procedure
- Install the rear coil springs.
- Raise the rear axle.
- Install the shock absorber lower mounting bolts.
- Remove the rear axle support.
- Lower the vehicle
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the shock absorber lower mounting bolts to 85 N·m (63 lb ft).
