For 1990-2009 cars only
Removal Procedure
- Remove the 2 screws which secure the license plate.
- Remove the license plate from the fascia.
Installation Procedure
- Drill two 11-12 mm (7/16-1/2 inch) holes approximately 20 mm (25/36 inch) deep at each dimple in the front bumper fascia (4). Drill the holes only if you are installing the license plate for the first time.
- Install the 2 front license plate plugs into the front bumper fascia only if you are installing the license plate for the first time.
- Install the front license plate to the front bumper fascia (4). Secure the plate with the 2 screws.
