Step | Action | Yes | No |
|---|---|---|---|
1 | Did you review the Backup Lamp Circuit Description and perform the necessary inspections? | ||
2 | Verify that the Park Lamps are inoperative. Do the Park Lamps operate normally? | Go to Testing for Intermittent Conditions and Poor Connections | |
3 |
Does the test lamp illuminate? | ||
4 | Connect the fused jumper between cavity 12 and cavity 17 of the Light Switch. Do the Park Lamps illuminate? | ||
5 | Repair the open circuit between the Junction Block C5, cavity 3 and the Light Switch C216, cavity 12. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | |
6 | Replace the Light Switch assembly. Refer to Headlamp Switch Replacement . Did you complete the repair? | -- | |
7 | Test for an open condition between the Junction Block C1, cavity 2 and S217. Does an open condition exist? | ||
8 | Repair the open condition between C1, cavity 2 of the Junction Block and S217. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | |
9 | Operate the System in order to verify the repair. Did you correct the condition? | System OK |
