Step | Action | Yes | No |
|---|---|---|---|
1 | Did you review the Headlights/Daytime Running Lights (DRL) Circuit Description and perform the necessary inspections? | Go to Step 2 | |
2 | Verify that the headlamp low beams are inoperative. Do the headlamp low beams operate normally? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Do the low beams operate? | Go to Step 4 | Go to Step 5 |
4 | Replace the Turn Signal/Headlamp Switch. Refer to Headlamp Switch Replacement . Did you complete the repair? | Go to Step 6 | -- |
5 | Repair the open in the RED/WHT wire between cavity 13 of the Turn Signal/Headlamp Switch connector and S233. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | Go to Step 6 | -- |
6 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
