GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Tahoe - 4WD 🢒 Steering 🢒 Power Steering 🢒 Power Steering Pump Shaft Seal Replacement

Removal Procedure
  1. Remove the power steering pump from the vehicle. Refer to Power Steering Pump Replacement.

    2. Object Number: 1555824 Size: SH

    Important: Use the shim stock in order to protect the drive shaft.

  2. Use a chisel in order to cut and remove the power steering pump shaft seal.

Installation Procedure

    Object Number: 1555824 Size: SH
  1. Lubricate the new power steering pump shaft seal with power steering fluid.
  2. Use a deep 1 inch tall socket in order to install the new power steering pump shaft seal.
  3. Install the power steering pump. Refer to Power Steering Pump Replacement.