Callout
| Component Name
|
|
Caution: Refer to Brake Dust Caution in the Preface section.
Preliminary Procedures
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Remove the brake rotor. Refer to
Rear Brake Rotor Replacement
.
- Disconnect the park brake cable from the actuator.
|
1
| Bolt, Park Brake Shoe Retaining (Qty: 2)
Notice: Refer to Fastener Notice in the Preface section.
Tighten
15 N·m (11 lb ft)
Tip
Use the appropriate cleaner to clean the work area. |
2
| Clip, Park Brake Shoe Retaining (Qty: 2)
Tip
If the retaining clips are found to be damaged, replace the retaining clips. |
3
| Shoe and Lining, Park Brake
Tip
| • | Turn the park brake shoe adjuster screw until it is fully retracted. |
| • | When removing or installing the park brake shoe, place the open end of the park brake shoe over the axle flange and rotate it until the shoe has cleared the flange. |
| • | When installing the park brake shoe, apply a small amount of brake lubricant to the brake shoe and the backing plate contact points. |
|
Callout
| Component Name
|
|
Caution: Refer to Brake Dust Caution in the Preface section.
Preliminary Procedures
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle.
- Remove the brake rotor. Refer to
Rear Brake Rotor Replacement.
- Disconnect the park brake cable from the actuator.
|
1
| Clip, Park Brake Shoe Retaining (Qty: 2)
|
2
| Pin, Park Brake Shoe Retaining (Qty: 2)
|
3
| Spring, Park Brake Shoe Lower Return
|
4
| Screw, Park Brake Shoe Adjuster
Tip
| • | Clean the threads of the adjuster screw to remove any corrosion. Apply a light coat of high temperature brake lubricant to the adjuster screw threads. |
| • | Turn the park brake shoe adjuster screw until it is fully retracted. |
|
5
| Spring, Park Brake Shoe Upper Return
|
6
| Shoe and Lining, Park Brake (Qty: 2)
Tip
| • | When installing the park brake shoe, apply a small amount of brake lubricant to the brake shoe and the backing plate contact points. |
|
