Tire Pressure Monitor (TPM) Option

TPM Option Enable

After replacing the passenger door module (PDM)/switch assembly, the scan tool must be used to enable the TPM option, refer to Control Module Setup .

Tire Type and Tire Pressure

Tire Type/Pressure Selection

After replacing the PDM/switch assembly, the scan tool must be used to select the correct tire type and the front and rear tire pressures for the vehicle being serviced. Refer to Control Module Setup .

Spare Tire Monitoring

Spare Tire Monitoring Disable

This special function is used to clear any Id that has been unintentionally learned into the spare tire location.