GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 653104  Size: SH
  1. Remove the power accessory switch panel. Refer to Power Accessory Switch Panel Replacement .
  2. Disconnect the power window switch electrical connector.
  3. Remove the screws from the window switch.
  4. Remove the switch from the switch panel by lifting the rear of the switch and sliding the switch out from the switch panel.

Installation Procedure

  1. Install the switch to the switch panel sliding the front tabs in first. Rock the switch down in order to seat the switch completely.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the screws to the window switch.
  4. Tighten
    Tighten the window switch screws to 2 N·m (18 lb in).

  5. Connect the electrical connector to the window switch.

  6. Object Number: 653104  Size: SH
  7. Install the power accessory switch panel. Refer to Power Accessory Switch Panel Replacement .