Child Restraint Tether Anchor Second Seat (AM7)

Extended Cabs with a Second Seat (AM7)

1. Position the child seat in the front seat center or the front seat right. Use the 2nd seat center occupant lap belt latch plate if the seat is unoccupied.



2. Position the child seat in the 2nd seat left, center, or right. Use pick-up anchorage. Locate the anchor between the scallops from the right or left side of the back panel.
3. If all seats are occupied, then place the child seat in a rear seat position that will allow the use of the cargo tie downs.

Child Restraint Tether Anchor Tahoe/Yukon

Utility Model

1. Position the child seat in the front seat center or the front seat right (2-Door).
2. Position the child seat in the front seat center (4-Door with 2nd folding seat (AM7)).
3. Use the 2nd seat center occupant lap belt latch plate if the seat is unoccupied.
4. If all seats are occupied, then place the child seat in a rear seat position that will allow the use of the cargo tie downs.

Child Restraint Tether Anchor AT5

Suburban with 2nd Folding Seat (AT5), Utility-4-Door with 2nd Folding Seat (AM7)

1. Position the child seat in the front seat right. Use GM P/N 15971501 in order to latch the tether to the buckle on the 2nd 40 percent seat if the seat is unoccupied.



2. Position the child seat in the front seat center. Use 2nd seat center occupant lap belt latch plate if seat is unoccupied.



3. Position the child seat in the 2nd seat center. Use GM P/N 15989781 to the rear most set of cargo tie downs. Hook the top tether to the plate at the center of the tether.



4. Position the child seat in the 2nd seat left. Use the left rear cargo tie down.
5. Position the child seat in the 2nd seat right. Use the right rear cargo tie down.
6. If all seats are occupied, then place the child seat in a rear seat position that will allow the use of the cargo tie downs.

Child Restraint Tether Anchor Crew Cab

Suburban with 2nd Folding Seat (AT5), Crew Cab

1. Position the child seat in the front seat center or the front seat right (Crew cab).
2. Position the child seat in the front seat center (Suburban).
3. Use the 2nd seat center occupant lap belt latch plate if the seat is unoccupied.
4. If all seats are occupied, then place the child seat in a rear seat position that will allow the use of the cargo tie downs.

Child Restraint Tether Anchor AM7

Extended Cab without 2nd Seat (AM7)

1. If you position the child seat in the front seat center, use the stud in the floor closer to the center of the vehicle.
2. If you position the child seat in the front seat right, use the stud in the floor closer to the side of the vehicle.

Child Restraint Tether Anchor AS3

Suburban with 3rd Seat (AS3)

1. If you put the child seat in the 2nd seat center folding position or in the 2nd seat left folding position, use the 3rd seat center occupant lap belt latch plate if the seat is unoccupied.
2. If you put the child seat in the 2nd seat right folding position, use GM P/N 15971501 in order to latch the tether to the 3rd seat buckle directly behind this child seat position if the seat is unoccupied.



3. If you put the child seat in the 3rd seat center, use GM P/N 15989781 to the rearmost set of the cargo tie downs. Hook the top tether to the plate at the center of the tether.



4. If you put the child seat in the 3rd seat left, use the left rear cargo tie down. If you put the child seat in the 3rd seat right, use the right rear cargo tie down.
5. If all seats are occupied, then place the child seat in a rear seat position that will allow the use of the cargo tie downs.

Child Restraint Tether Anchor Suburban/Yukon XL

Suburban without 2nd Folding Seat (AT5)

1. Position the child seat in the front seat center or the front seat right.
2. Use the seat anchor.
3. If all seats are occupied, then place the child seat in a rear seat position that will allow the use of the cargo tie downs.

Child Restraint Tether Anchor Door

Suburban with and without 3rd Folding Seat (AS3), Utility-2-Door and 4-Door

1. If you put the child seat in the 2nd seat left folding position, use the left front cargo tie down (Suburban without 3rd folding seat).
2. If you put the child seat in the 2nd seat right folding position, use the right front cargo tie down (Suburban without 3rd folding seat).
3. If you put the child seat in the 3rd seat left (Suburban with 3rd seat) or in the 2nd seat left (Utility), use the left rear cargo tie down.
4. If you put the child seat in the 3rd seat right (Suburban with 3rd seat) or in the 2nd seat right (Utility), use the right rear cargo tie down.