GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 662962  Size: SH
  1. Remove the battery. Refer to Battery Replacement .
  2. Remove the battery tray bolts from the following:
  3. • Fender inner panel
    • Battery tray reinforcement
    • Battery tray support
  4. Remove the battery tray.

Installation Procedure


    Object Number: 662962  Size: SH
  1. Install the battery tray.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the battery tray bolts to the following:
  4. • Fender inner panel
    • Battery tray reinforcement
    • Battery tray support

    Tighten
    Tighten the battery tray bolts to 9 N·m (80 lb in).

  5. Install the battery. Refer to Battery Replacement .