GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Tahoe - 2WD 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Driver or Passenger Seat Head Restraint Replacement

Driver or Passenger Seat Head Restraint Replacement Without AYE


Object Number: 1582964 Size: MF

Callout

Component Name

1

Front Seat Head Restraint

Procedure

  1. Depress the button on the inboard head restraint guide to raise the head restraint to the full up position.
  2. Insert a small diameter tool into the hole on the inboard side of the outboard head restraint guide and pull upward to remove.

Driver or Passenger Seat Head Restraint Replacement With AYE


Object Number: 2037467 Size: MF

Callout

Component Name

Preliminary Procedures

Remove Front Seat Back Cushion Finish Panel. Refer to Driver or Passenger Seat Back Cushion Finish Panel Replacement

1

Front Seat Head Restraint

Procedure

  1. Depress the button on the inboard head restraint guide to raise the head restraint to the full up position.
  2. Insert small tool into opposite head restraint retainer to release.
  3. Tie a wire or string to the end of the DVD cable in order to aid in the installation of the new Front Seat Head Restraint.
  4. Disconnect the electrical connector.