Preliminary Procedures

1. Remove the headlamp. Refer to Headlamp Replacement .
2. Remove the radiator support diagonal brace. Refer to Radiator Support Diagonal Brace Replacement .
3. Remove the upper rear fender bracket. Refer to Front Fender Rear Upper Bracket Replacement .
4. Remove the auxiliary battery tray. Refer to Auxiliary Battery Tray Replacement
5. Remove the left hood hinge. Refer to Hood Hinge Replacement .
6. Remove the left hood link. Refer to Hood Link Replacement .
7. Remove the underhood electrical center/junction block. Refer to Underhood Electrical Center or Junction Block Replacement .
8. Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Left Side .

1

Fender Mounting Bolt (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
25 N·m (18 lb ft)

2

Fender Mounting Bolt (Qty: 3)

Tighten
30 N·m (22 lb ft)

Procedure

Apply threadlock compound to the bolts.

3

Fender Mounting Clip (Qty: 3)

4

Fender Mounting Nut (Qty: 2)

Tighten
25 N·m (18 lb ft)

5

Fender Assembly

Tip
Transfer any necessary additional parts as needed.