Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
Schematic Reference: OnStar Schematics DEFINITION: The OnStar® call center operator can clearly be heard but will advise the caller that they cannot clearly hear them or cannot hear them at all. | ||||
1 | Did you perform the Cellular Communication Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Does the OnStar® operator hear your voice? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Does the voltage measure near the specified value? | 9 V | Go to Step 4 | Go to Step 5 |
4 | Measure the voltage from the Cellular Telephone Microphone Signal circuit to the drain wire. Does the voltage measure near the specified value? | 9 V | Go to Step 7 | Go to Step 6 |
5 | Test the Cellular Telephone Microphone Signal circuit for an open or a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 14 | Go to Step 8 |
6 | Test the Drain Wire for an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 14 | Go to Step 11 |
7 | Test the drain wire circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 14 | Go to Step 9 |
8 |
Did you find and correct the condition? | -- | Go to Step 14 | Go to Step 9 |
9 | Test the microphone signal circuit between the VIU and VCU for an open or short to ground. Did you find and correct the condition? | -- | Go to Step 14 | Go to Step 10 |
10 | Inspect for poor connections at the harness connector of the Microphone assembly. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 14 | Go to Step 13 |
11 | Inspect for poor connections at the harness connector of the VIU. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 14 | Go to Step 12 |
12 | Replace the Microphone assembly. Refer to Mobile Telephone Microphone Replacement . Did you complete the replacement? | -- | Go to Step 14 | -- |
13 |
Important: Perform the OnStar® setup procedure. Replace the VIU. Refer to OnStar Vehicle Interface Unit Replacement . Did you complete the replacement? | Go to Step 14 | -- | |
14 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
