GM Service Manual Online
For 1990-2009 cars only

Head Restraint Replacement Non-Cadillac

Removal Procedure


    Object Number: 660154  Size: SH
  1. Raise the head restraint (1) to the full up position.
  2. Insert a paper clip or a similar tool in the hole at the side edges of the head restraint retainers.
  3. Press in on the tool in order to release the retainer clips (2).
  4. Lift the head restraint from the retainers.

Installation Procedure


    Object Number: 660154  Size: SH
  1. Install the head restraint (1) into the retainers.
  2. Push the head restraint to the full down position.
  3. Pull up in order to ensure that the head restraint engages with the head restraint retainers (2).