GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Tahoe - 2WD 🢒 Body and Accessories 🢒 Doors 🢒 Power Accessory Switch Panel Replacement

Removal Procedure

    Object Number: 294578 Size: SH
  1. Insert a flat-bladed tool into the slots on the power accessory switch panel in order to release the retainer clips.
  2. Remove the switch panel.
  3. Disconnect the electrical connectors from the switches.
  4. Remove the screws from the switches.
  5. Remove the power accessory switches from the switch panel.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.

  1. Install the power accessory switches to the switch panel.

    2. Tighten
    Tighten the power accessory switch screws to 2 N·m (18 lb in).

  2. Connect the electrical connectors to the switches.

    3. Object Number: 294578 Size: SH
  3. Position the switch panel to the door panel.
  4. Install the switch panel by pressing the switch panel into place until fully seated.