Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
Schematic Reference: Radio/Audio System Schematics | ||||
1 | Did you review the Radio/ Audio System Description and Operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Radio/Audio System Description and Radio/Audio System Operation |
2 |
Does the remote playback device operate without audio noise? | -- | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 |
Did you find and correct the condition? | -- | Go to Step 9 | Go to Step 4 |
4 | Test the common audio input circuit for a short, high resistance or an open.Refer to Circuit Testing and Wiring Repairs in wiring systems. Did you find and correct the condition? | -- | Go to Step 9 | Go to Step 5 |
5 | Inspect the audio harness shield for damage.Refer to Circuit Testing and Wiring Repairs in wiring systems. Did you find and correct the condition? | -- | Go to Step 9 | Go to Step 6 |
6 | Inspect for poor connections at the harness connector of the remote playback device. Refer to Testing for Intermittent Conditions and Poor Connections in wiring systems. Did you find and correct the condition? | -- | Go to Step 9 | Go to Step 7 |
7 | Inspect for poor connections at the harness connector of the radio. Refer to Testing for Intermittent Conditions and Poor Connections in wiring systems. Did you find and correct the condition? | -- | Go to Step 9 | Go to Step 8 |
8 | Replace the remote playback device. Refer to Remote Compact Disc Player Replacement for service procedure. Did you complete the replacement? | -- | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
