Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
Schematic Reference: Radio/Audio System Schematics | ||||
1 | Did you review the Radio/Audio System Description and Operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Radio/Audio System Description and Radio/Audio System Operation |
2 |
Does the radio operate properly? | -- | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Insert a tape/CD into the radio. Does the radio accept the tape/CD? | -- | Go to Step 4 | Go to Step 5 |
4 |
Did you find and correct the condition? | -- | Go to Step 9 | Go to Step 7 |
5 | Test the battery possitive voltage circuit for a short, or an open.Refer to Circuit Testing and Wiring Repairs in wiring systems. Did you find and correct the condition? | -- | Go to Step 9 | Go to Step 6 |
6 | Test the remote playback device voltage circuit for a short, or an open.Refer to Circuit Testing and Wiring Repairs in wiring systems. Did you find and correct the condition? | -- | Go to Step 9 | Go to Step 7 |
7 | Inspect for poor connections at the harness connector of the radio.Refer to Testing for Intermittent Conditions and Poor Connections in wiring systems. Did you find and correct the condition? | -- | Go to Step 9 | Go to Step 8 |
8 | Replace the radio.Refer to Radio Replacement for service procedure. Did you complete the replacement? | -- | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you complete the repair? | -- | System Ok | Go to Step 2 |
