Name | Location | Locator View | Connector End View |
|---|---|---|---|
Automatic Transmission Input Shaft Speed Sensor (4L80E) | LF of Transmission | ||
Instrument Cluster | On the upper left end of the IP, above the steering column | Instrument Panel, Gages, and Console Component Views in Instrument Panel and Console | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel and Console |
IP Fuse Block | To the left of the IP, near the left front door jamb switch | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Stoplamp Switch | On the top of the brake pedal | Lighting Systems Component Views in Lighting Systems | Lighting Systems Connector End Views in Lighting Systems |
Vehicle Control Module (VCM) (Gas) | Engine Compartment, near EBCM | Engine Controls Component Views in Engine Controls | VCM Connector End Views in Engine Controls |
C100 | Part of the engine harness to IP harness, in the left rear side of the engine compartment, at the bulkhead | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C122 (M30) | On the right side of the transmission | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C122 (MT1) | On the left side of the transmission | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C200 | Behind the right side of the IP, near the heater motor, in foam wrap | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
S106 (5.0L, 5.7L) | Engine harness, approximately 17 cm (6.5 in) from the EGR valve breakout, toward the fuel injector breakout | -- | -- |
S106 (7.4L) | Engine harness, approximately 7 cm (2.5 in) from the EGR valve breakout, toward the fuel injector breakout | -- | -- |
S152 (Gas) | Engine harness, approximately 6.5 cm (2.5 in) from the EBCM breakout | -- | -- |
S152 (Diesel) | Engine harness, approximately 4 cm (1.5 in) from the IP harness breakout, toward P101 | -- | -- |
S222 | IP harenss, approximately 20 cm (8 in) from the inflatable restraint switch breakout | -- | -- |
