GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Tahoe Z71 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Inside Rearview Mirror Replacement

Removal Procedure

    Object Number: 311618 Size: SH
  1. Disconnect the electrical connectors (1).
  2. Remove the electrical wire cover (3).

    3. Object Number: 311577 Size: SH
  3. Remove the screw (3) from the base.
  4. Slide mirror off of the support (1).

Installation Procedure

    Object Number: 311577 Size: SH
  1. Slide the mirror on to the mirror support (1).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screw (3) to the base.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).


    Object Number: 311618 Size: SH
  3. Install the wire cover (3).
  4. Connect the electrical connectors (1).