GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Tahoe Z71 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Transmission Floor Shift Control Indicator Lamp Replacement

Removal Procedure
  1. Make sure the headlamp switch is in the OFF position.
  2. Unscrew the shift lever knob.

    3. Remove the shift lever knob.

  3. Remove the 4 bezel screws.

    4. Object Number: 277257 Size: SH
  4. Remove the transfer case bezel.
  5. Pull the bulbs straight out of the sockets.

Installation Procedure

    Object Number: 277257 Size: SH
  1. Push the bulbs straight into the sockets.
  2. Install the bulbs and sockets into the back of the bezel.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bezel to the floor with the 4 screws.

    4. Tighten
    Tighten the 4 screws to 2 N·m (18 lb in).

  4. Install the shift lever knob.