Remote Control Door Lock Receiver Replacement. Chevrolet Tahoe Z71 2000

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2000 🢒 Tahoe Z71 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Remote Control Door Lock Receiver Replacement

Removal Procedure

Remove the bolts (2) that retain the instrument panel center support bracket to the steering column bracket (1).
Remove the bolt (3) that retains the reinforcement to the instrument panel center support bracket.
Disconnect the electrical connector from the remote control door lock receiver.
Remove the instrument panel center support bracket (4).

Remove the remote control door lock receiver retainer (3).
Remove the remote control door lock receiver (2) from the instrument panel center support bracket.

Installation Procedure

Install the remote control door lock receiver (2) to the instrument panel center support bracket.
Install the remote control door lock receiver retainer (3).
Connect the electrical connector to the remote control door lock receiver.

Install the instrument panel center support bracket (4).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Install the bolt (3) that retains the reinforcement to the instrument panel center support bracket.

Tighten
Tighten the bolt to 2 N·m (18 lb in).

Install the bolts (2) that retain the instrument panel center support bracket to the steering column bracket (1).

Tighten
Tighten the bolts to 65 N·m (47 lb ft).