The radio data system (RDS) uses a single button to select a specific radio station once it is set to the listener’s preference. With RDS:

1. With the ignition switch in the I or II position, turn the radio ON. At this time, "CODE" will be shown on the radio display.
2. Press the P-UP button until the correct first digit is shown on the display.
3. Press the P-DN button to move over to the second digit and then press P-UP once again to enter the correct second digit.
4. Use steps 2 and 3 to enter the third and fourth digits using the same method.
5. After entering the correct 4-digit security code, press the TP button. "CODE OK" will briefly appear on the radio display, and the system is ready for use.

All audio systems use 4 speakers: 2 speakers mounted in the front doors and 2 speakers mounted in the rear parcel side shelf.

The roof antenna is located on the roof and is designed to separate the antenna pole from the antenna base. The antenna pole should be removed to prevent the painting damage before washing the vehicle. The roof antenna cannot be adjusted.

The head and the capstan are the 2 parts of the tape player that should be cleaned. This service should be performed every 100 hours of cassette operation. In order to clean the head and the capstan, use a cotton swab dipped in rubbing alcohol. A cassette cleaning kit may also be used to clean the head and the capstan. Follow the cleaning kit instructions to clean the tape player. Do not touch the tape head with magnetized tools. If the head becomes magnetized, it will degrade cassettes played in the player. No service is performed on the cassettes. The cassette manufacturer handles warranties of the cassettes. Store cassettes away from extreme heat and direct sunlight.

Handle discs carefully. Store the discs in protective cases away from the sun, heat, and dust. If the surface is soiled, dampen a clean, soft cloth in a solution of mild neutral detergent and wipe the disc clean. Mini discs, about 3 inches in diameter, will not eject and should not be used.