Rear Spoiler Replacement. Chevrolet Silverado

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2007 🢒 Silverado - 4WD 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Rear Spoiler Replacement

Rear Spoiler Replacement 901/902

Callout

Component Name

Endgate Spoiler Assembly Screws (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

Endgate Spoiler Assembly Locator Pin

Endgate Spoiler Assembly Adhesive Tape Liner

Tip

•	The part and surface should be ambient temperature prior to installation. The vehicle should remain ambient temperature for one hour after assembly to allow adhesive to develop sufficient bond strength.

•	Release the liner and wet out once the endgate spoiler is in position and the screws have been installed.

Endgate Spoiler Assembly

Endgate Spoiler Assembly Riv-nuts (Qty: 4)