Preliminary Procedures

1. Remove door window control switch. Refer to Rear Side Door Window Switch Replacement .
2. Remove door trim panel. Refer to Rear Side Door Trim Panel Replacement .

1

Rear Side Door Inside Handle Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Rear Side Door Inside Handle Assembly

1

Front Side Door Inside Handle Seal

Procedure

1. Rotate the front side door inside release handle to full open position.
2. Use a small pair of 45 degree needle nose pliers to remove the foam seal at the handle to expose retaining clip.
3. Use a small pair of 45 degree needle nose pliers to release the clip inside the handle.
4. Remove the pin after the clip is released.

2

Front Side Door Inside Handle