Preliminary Procedure

1. Remove the fixed antenna, if equipped. Refer to Radio Antenna Replacement .
2. Remove the windshield wiper arms. Refer to Windshield Wiper Arm Replacement .
3. Remove the rear hood seal. Refer to Hood Rear Seal Replacement .
4. Remove the two outer clips securing the air inlet grille panel to the flange on the air plenum.

1

Air Inlet Grille Panel End Panel (Qty: 2)

2

Air Inlet Grille Panel Retainer (Qty: 2)

3

Air Inlet Grille Panel Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.3 N·m (12 lb in)

4

Air Inlet Grille Panel Clip

5

Air Inlet Grille Panel