GM Service Manual Online
For 1990-2009 cars only

P245/70R17 General Ameritrac Tire Wear Vibration - keywords alignment edge front outer suspension tire vibration wear wheel worn

Subject:P245/70R17 General Ameritrac Tire Wear Vibration

Models:2005-2006 Chevrolet Avalanche, Suburban, Tahoe
2007 Chevrolet Silverado
2005-2007 Chevrolet Silverado Classic
2007 GMC Sierra
2005-2007 GMC Sierra Classic
2005-2006 GMC Yukon Models



This PI is being updated to add the General article numbers. Please discard PIT4193.


The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.

Condition/Concern:

Some owners may comment on Wear/Vibration/Flat Spotting on some P245/70R17 General Ameritrac. A tire construction change was made to help correct these concerns.

Recommendation/Instructions:

To verify the replacement tires are of the new construction, check the date code. This tire is built at two tire plants and the date code is different between the two plants. The complete eleven digit DOT number must be read to determine the plant and the date code. The first 2 digits designate the Plant and the last 4 are the date code.

If the first 2 digits are "P5" then the last 4 will need to be 4406 or later. If the first 2 digits are "A3" then the last 4 digits will need to be 4506 or later (see example below which is read as Plant "A3" and the 30th week of 2006). The 4 digit date code is read as the first 2 digits indicate the week of the year and the last 2 are the year, example 4406 is the 44th week of 2006

Note:  In most cases, only a partial DOT number will be on the outer side wall, and the complete DOT number will be on the vehicle side of the tire.


Object Number: 1873563  Size: SH

Note:  If ordering tires from a General Tire Dealer please reference the following article numbers when ordering:

Black Wall - 1548107000

Outline White Letter - 1548108000

Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.