GM Service Manual Online
For 1990-2009 cars only

Floor Console Bezel Replacement Luxury Upper

Removal Procedure

  1. Remove the I/P cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .

  2. Object Number: 854847  Size: SH
  3. Insert a flat bladed tool between the Bezel assembly and the console.
  4. Pry the bezel from the console outwards partially in order to gain access to the connectors.
  5. Disconnect the electrical connectors (1).
  6. Remove the bezel from the console.

Installation Procedure


    Object Number: 854847  Size: SH
  1. Place the bezel to the console.
  2. Connect the electrical connectors.
  3. Install the bezel to the console by pushing on the corners until the retainers (1) click in place.
  4. Install the I/P cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement.

Floor Console Bezel Replacement Non-Luxury Lower

Removal Procedure

  1. Remove the cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .

  2. Object Number: 882679  Size: SH
  3. Remove the upper bezel by inserting a flat bladed tool between the console and bezel.

  4. Object Number: 882681  Size: SH
  5. Disconnect the electrical connectors (1, 2).
  6. Remove the storage bin. Refer to Front Floor Console Compartment Replacement .

  7. Object Number: 882646  Size: SH
  8. Insert a flat bladed tool between the console and bezel in order to pry it out.
  9. Remove the bezel from the console.

Installation Procedure


    Object Number: 882646  Size: SH
  1. Install the bezel to the console till it clicks in place.
  2. Install the storage bin. Refer to Front Floor Console Compartment Replacement .

  3. Object Number: 882681  Size: SH
  4. Connect the electrical connectors (1, 2) to the upper bezel.

  5. Object Number: 882679  Size: SH
  6. Install the upper bezel till it clicks in place.
  7. Install the cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .

Floor Console Bezel Replacement Non-Luxury Upper

Removal Procedure

  1. Remove the I/P cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .

  2. Object Number: 882679  Size: SH
  3. Insert a flat bladed tool between the Bezel assembly and the console.
  4. Pry the bezel from the console outwards partially in order to gain access to the connectors.

  5. Object Number: 882681  Size: SH
  6. Disconnect the electrical connectors (1) and (2).
  7. Remove the bezel from the console.

Installation Procedure


    Object Number: 882681  Size: SH
  1. Place the bezel to the console.
  2. Connect the electrical connectors (1) and (2).

  3. Object Number: 882679  Size: SH
  4. Install the bezel to the console pushing on the corners till the retainers click in place.
  5. Install the I/P cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .