If your vehicle has this feature, the controls for the memory function are located on the driver's door.
These buttons are used to program and recall memory settings for the driver's seat and both the driver's and passenger's outside mirrors. The settings for these features can be saved for up to two drivers.
To store the memory settings, do the following:
- If you have an automatic transmission, place the vehicle in PARK (P).
- Adjust the driver's seat, including the seatback recliner and lumbar, and both outside mirrors to your preference.
- Press and hold the 1 or 2 button of the memory control for three seconds. A double chime will sound to let you know that the position has been stored.
If you have a manual transmission, set the parking brake.
To repeat the procedure for a second driver, follow the preceding steps, but press the other numbered memory control button.
To recall a memory position, do one of the following:
| • | If you have an automatic transmission, press and release the desired button 1 or 2 while the vehicle is in PARK (P). A single chime will sound and the memory position will be recalled. |
| If the vehicle is not in PARK (P), the memory position will not be recalled. |
| • | If you have a manual transmission, press and release the desired button 1 or 2 while the parking brake is set. A single chime will sound and the memory position will be recalled. |
| If the parking brake is not set, the memory position will not be recalled. |
To stop recall movement of the memory seat feature at any time, press one of the memory buttons or power seat controls.
Easy Exit Seat
The controls for this memory function are located on the driver's door.
(Easy Exit Seat): This button is used to program and recall the desired driver's seat position when exiting or entering the vehicle. The seat position can be saved for up to two drivers.To store the seat exit position, do the following:
- If you have an automatic transmission, place the vehicle in PARK (P).
- Press and release the 1 or 2 button. The seat will move to the stored memory position.
- Adjust the seat to the desired exit position.
- Press and hold the exit button of the memory control for three seconds. A double chime will sound to let you know that the position has been stored for the selected button 1 or 2.
If you have a manual transmission, set the parking brake.
To repeat the procedure for a second driver, follow the preceding steps, but press the other numbered memory control button.
To use the seat exit position, do one of the following:
| • | If you have an automatic transmission, press and release the exit button on the memory control while the vehicle is in PARK (P). |
| • | If you have a manual transmission, press and release the exit button on the memory control while the parking brake is set. |
| • | If this feature is activated in the Driver Information Center (DIC), removing the key from the ignition will move the seat to the exit position. |
See "Easy Exit Seat" under DIC Vehicle Customization for more information on activating this feature in the DIC.
