GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 SSR 🢒 Body and Accessories 🢒 Seats 🢒 Seat Cushion Outer Trim Panel Replacement

Removal Procedure
  1. Remove the front finish panel from the seat. Refer to Front Seat Front Finish Panel Replacement .
  2. Remove the seat back recliner handle. Refer to Driver Seat and Passenger Seat Recliner Handle Replacement .

    3. Object Number: 1200436 Size: SH
  3. Remove the 2 seat cushion outer trim panel screws.

    4. Object Number: 1200416 Size: SH
  4. Remove the seat cushion outer trim panel from the seat assembly.

Installation Procedure

    Object Number: 1200416 Size: SH
  1. Align the seat cushion outer trim panel to the seat assembly.

    2. Object Number: 1200436 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the 2 screws retaining the seat cushion outer trim panel to the seat assembly.

    3. Tighten
    Tighten the seat cushion outer trim panel screws to 1.5 N·m (13 lb in).

  3. Install the seat back recliner handle. Refer to Driver Seat and Passenger Seat Recliner Handle Replacement .
  4. Install the front finish panel to the seat. Refer to Front Seat Front Finish Panel Replacement .